DC-DC Converters - 12-20 Watts Through Hole Mount

JCK15 Series


	• 15 Watts • Industry Standard Package • 1500 VDC Isolation • Continuous Short Circuit Protection • High Efficiency - up to 89% • 3 Year Warranty

Click Here for Model Numbers & Stock Check

Data/Approvals

Short Form Datasheet


	Specifications
	Input
	Input Voltage Range		12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-75 VDC)
	Input Current		See table on datasheet
	Input Reflected Ripple Current		20 mA rms through 12 µH inductor, 5 Hz to 20 MHz
	Under Voltage Lockout		12 V models On 8.6 V, Off 7.9 V typical 24 V models On 17.8 V, Off 16 V typical 48 V models On 33.5 V, Off 30.5 V typical
	Input Surge		12 V models 30 VDC for 100 ms 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms
	Isolation Resistance		109Ω min
	Output
	Output Voltage		See table on datasheet
	Minimum Load		No minimum load required
	Line Regulation		±0.5% max
	Load Regulation		±0.5% max for single and dual outputs except ±0.8% for D03 versions
	Cross Regulation		±5% max on dual output models, see note 2
	Setpoint Accuracy		±1.0% max
	Start Up Delay		<20 ms
	Start Up Rise Time		<5 ms
	Ripple & Noise		75 mV pk-pk max, see note 3 of datasheet
	Transient Response		±3% max deviation, recovery to within 1% in 250 µs for a 25% load change
	Temperature Coefficient		0.02%/°C
	Overcurrent Protection		>140% of full load at nominal input
	Short Circuit Protection		Trip & restart (Hiccup mode) with auto recovery
	Capacitive Load		See table
	General
	Efficiency		See table on datasheet
	Isolation Voltage		1500 VDC Input to Output, optional 3500 V, see note 4 1500 VDC Input to Case 1500 VDC Output to Case
	Isolation Capacitance		1200 pF typical
	Switching Frequency		300 kHz typical
	MTBF		>1.1 MHrs to MIL-HDBK-217F at 25 ºC, GB
	Environmental
	Operating Temperature		-40 °C to +100 °C, derate from 100% load at +70 °C to 0% load at +100 °C
	Case Temperature		+100 °C max
	Storage Temperature		-40 °C to +125 °C
	Cooling		Convection-cooled
	Operating Humidity		Up to 95% RH, non-condensing
	EMC and Safety
	Emissions		EN55022, Class A conducted & radiated with external components, see application note
	ESD Immunity		EN61000-4-2, 8 kV air, 6 kV contact, Perf Criteria A
	Radiated Immunity		EN61000-4-2, 8 kV air, 6 kV contact, Perf Criteria A
	EFT/Burst		EN61000-4-4 level 3, Perf Criteria B* (*External input capacitor required 220 µF/100 V)
	Surge		EN61000-4-5 level 2, Perf Criteria B* *External input capacitor required 220 µF/100 V)
	Conducted Immunity		EN61000-4-6 10 V/rms,Perf Criteria A
	Magnetic Fields		EN61000-4-8 1 A/m, Perf Criteria A


Model Number	Input	Output	Power	Back to top

JCK1512D03	9-18 VDC	±3.3 V/±1.5 A	15 W	Stock Check
JCK1512D05	9-18 VDC	±5 V/±1.5 A	15 W	Stock Check
JCK1512D12	9-18 VDC	±12 V/±0.625 A	15 W	Stock Check
JCK1512D15	9-18 VDC	±15 V/±0.5 A	15 W	Stock Check
JCK1512S05	9-18 VDC	5 V/3.0 A	15 W	Stock Check
JCK1512S12	9-18 VDC	12 V/1.25 A	15 W	Stock Check
JCK1512S15	9-18 VDC	15 V/1.0 A	15 W	Stock Check
JCK1512S3V3	9-18 VDC	3.3 V/3.0 A	15 W	Stock Check
JCK1524D03	18-36 VDC	±3.3 V/±1.5 A	15 W	Stock Check
JCK1524D05	18-36 VDC	±5 V/±1.5 A	15 W	Stock Check
JCK1524D12	18-36 VDC	±12 V/±0.625 A	15 W	Stock Check
JCK1524D15	18-36 VDC	±15 V/±0.5 A	15 W	Stock Check
JCK1524S05	18-36 VDC	5 V/3.0 A	15 W	Stock Check
JCK1524S12	18-36 VDC	12 V/1.25 A	15 W	Stock Check
JCK1524S15	18-36 VDC	15 V/1.0 A	15 W	Stock Check
JCK1524S3V3	18-36 VDC	3.3 V/3.0 A	15 W	Stock Check
JCK1548D03	36-75 VDC	±3.3 V/±1.5 A	15 W	Stock Check
JCK1548D05	36-75 VDC	±5 V/±1.5 A	15 W	Stock Check
JCK1548D12	18-36 VDC	±12 V/±0.625 A	15 W	Stock Check
JCK1548D15	36-75 VDC	±15 V/±0.5 A	15 W	Stock Check
JCK1548S05	36-75 VDC	5 V/3.0 A	15 W	Stock Check
JCK1548S12	36-75 VDC	12 V/1.25 A	15 W	Stock Check
JCK1548S15	36-75 VDC	15 V/1.0 A	15 W	Stock Check
JCK1548S3V3	36-75 VDC	3.3 V/3.0 A	15 W	Stock Check