Medical - Medical 15 - 175 W

AEM Series


	• 60 Watts • CEC 2008 & EISA 2007 Compliant ≥12 V • Worldwide Medical Approvals • 4000 VAC Isolation • Class II Construction • 3 Year Warranty

Click Here for Model Numbers & Stock Check

Data/Approvals

Short Form Datasheet


	Specifications
	Input
	Input Voltage		90-264 VAC
	Input Frequency		47-63 Hz
	Input Current		0.6 A rms max
	Inrush Current		80 A max at 264 VAC
	Input Protection		Fitted with a T2 A/250 VAC fuse in live line
	No Load Input Power		<0.5 W for ≥12 V output
	Output
	Output Voltage Trim		See datasheet
	Initial Set Accuracy		±2% set at 60% load
	Minimum Load		No mimimum load required
	Start Up Delay		3 s max
	Start Up Rise Time		2 ms
	Hold Up Time		8 ms minimum at 115 VAC
	Line Regulation		±1%
	Transient Response		5% max deviation recovering to within 1% within 500 µs for 50% load change
	Ripple & Noise		1% max, 20 MHz BW see note 2
	Overvoltage Protection		See datasheet
	Overload Protection		120-150%
	Short Circuit Protection		Trip & restart (hiccup mode), auto-recovery
	Temperature Coefficient		±0.05%/°C
	General
	Efficiency		85%, See datasheet
	Isolation		4000 VAC Input to Output
	Switching Frequency		70 kHz typical
	Power Density		4.2 W/Inch
	MTBF		500 kHrs to MIL-STD-217F
	Environmental
	Operating Temperature		0 °C to +60 °C, derate from 100% load at +40 °C to 50% load at +60 °C
	Cooling		Convection-cooled
	Operating Humidity		15-95% non-condensing
	Storage Temperature		-20 °C to +85 °C
	Operating Altitude		3000 m
	Vibration		5-500 Hz at 3 g for 10 mins on each axis
	Shock		30 g with 18 ms half sine wave, 3 times on each axis
	EMC and Safety
	Emissions		EN55011 Level B conducted & radiated
	Harmonic Currents		EN61000-3-2
	Voltage Flicker		EN61000-3-3
	ESD Immunity		EN61000-4-2 Level 3, Perf Criteria A
	Radiated Immunity		EN61000-4-3 Level 2, Perf Criteria A
	EFT/Burst		EN61000-4-4, Level 3, Perf Criteria A
	Surge		EN61000-4-5 Level 3, Perf Criteria A
	Conducted Immunity		EN61000-4-6 Level 3, Perf Criteria A
	Dips & Interruptions		EN61000-4-11, 70% UT for 500 ms, 40% UT for 100 ms, <5% UT for 5000 ms, Perf criteria A, B, B
	Safety Approvals		UL60601-1, EN60601-1, IEC60601-1, CE Mark


Model Number	Input	Output	Power	Back to top

AEM60US05	90-264 VAC	8 V/6 A	60 W	Stock Check
AEM60US12	90-264 VAC	12 V/5 A	60 W	Stock Check
AEM60US15	90-264 VAC	15 V/4 A	60 W	Stock Check
AEM60US18	90-264 VAC	18 V/3.33 A	60 W	Stock Check
AEM60US19	90-264 VAC	19 V/3.15 A	60 W	Stock Check
AEM60US24	90-264 VAC	24 V/2.5 A	60 W	Stock Check
AEM60US36	90-264 VAC	36 V/1.66 A	60 W	Stock Check
AEM60US48	90-264 VAC	48 V/1.25 A	60 W	Stock Check